given that you’ve got your cable, simply plug one end in to the A/V receiver “Sub out” or “LFE out”. Here is the devoted subwoofer output of the receiver that delivers LFE information from discrete recordings and summed bass for many networks set to “small” to your subwoofer.

Next, link one other end of this cable into the RCA degree connector marked “LFE input” or”“mono input of the subwoofer. In case your sub does not have dedicated input similar to this and instead has stereo RCA inputs, you may either link the cable to at least one associated with the two inputs or work with a Y-splitter for connecting it to both. The advantage of the Y-splitter could be the sign would be summed into both inputs associated with the sub increasing sensitiveness 6dB meaning you can easily now reduce the gain within the A/V receiver 6dB to ultimately achieve the exact exact same production level while you might have with just one connection applied to the sub. Having sufficient drive degree is seldom an issue with today’s contemporary A/V receiver therefore generally in most cases, we advice utilising the connection that is single.

Step three: Configure your Sub

In the majority of circumstances we advice bypassing the subwoofer’s interior bass administration facilities in support of the only present in your A/V receiver. You are able to do this either by engaging the LPF bypass switch (if available) or establishing the crossover to its setting that is maximum the truth associated with the Axiom EP800 pictured, that’s 150Hz).

There are many grounds for this:

Neglecting to disable your sub’s interior crossover may cause exorbitant losings within the subwoofers passband hence degrading the quality that is sound found in conjunction along with your A/V receiver’s bass administration facilities. This is especially valid in the event that crossover regularity of both the sub’s LPF as well as your receiver’s bass administration are set to your exact same regularity. This can be called cascading crossovers and may be avoided usually.

Now that you’ve disabled your subwoofer’s crossover, set the known level to about 50percent of max amount. We advice establishing the period change to 0 levels or good. You can easily revisit this later on to see in the event that 180 levels or negative environment seems better in your body insurance firms a buddy flip the switch when you pay attention during the seated position to compare the 2 settings.

A/V Receiver Bass Management Settings

Don’t neglect to setup the bass administration in your A/V receiver. Get into its bass administration menu and set all speakers to “Small” while the crossover regularity to 80Hz. This will be a great kick off point and a standard configuration that really works perfect for most systems. It is also the THX recommendation for valid reason, it really works well. Be sure you additionally correctly set channel distances whenever configuring your bass administration.

Editorial Note on two channel bass:

Some A/V receivers require you to definitely configure them to interact the subwoofer whenever playing two channel sources even although you have actually the primary networks set to “small”. Ensure you know about this else you will not have sufficient bass in such circumstances.

Suggested Reading

Step four: Calibrating your Sub

Your subwoofer is correctly put and setup. Now it is time to level match it to your remainder of one’s speakers therefore it blends in seamlessly without drawing awareness of it self. This can be done in two other ways: automobile setup (in the event the receiver has this particular feature) or calibration that is manual.

Car Setup

If you want never to manually calibrate and rather desire to count on your receiver’s car calibration process, stick to the manufacturer’s directions on the best way to perform this task. Unless otherwise stated by the manufacturers., always spot the microphone provided with your A/V receiver on a tripod or stay from your human body or area of one’s sofa at most of your paying attention position. Position the microphone at seated ear level position and allow the A/V receiver take its measurements.

Denon AVP-A1HDCWe Auto Setup for Audyssey MultEQXT

Many automobile setup programs are pretty accurate at environment distance and amounts for every channel. But, we frequently suggest going to the setup menus a while later and crossover that is adjusting to 80Hz and all sorts of speakers which were set to “Large” back again to “Little” to guarantee the most effective integration in your body.

Manual Calibration